The Fortron Capacitor serves as an energy storage and management device for MFFS machines. It's designed to collect Fortron generated by Coercion Derivers and transfer it to other machines that need Fortron to operate, essentially acting as a "hub".

Recipe

Recipe Type	Ingredients	Outputs	Recipe preview
Recipe Type Shaped Crafting	Ingredients 4x Steel Ingot 4x Focus Matrix 1x Battery	Outputs 1x Fortron Capacitor	Recipe preview Steel Ingot #c:ingots/steel Focus Matrix Battery Focus Matrix Steel Ingot #c:ingots/steel Steel Ingot #c:ingots/steel Focus Matrix Steel Ingot #c:ingots/steel Focus Matrix Fortron Capacitor
Expand

Usage

Place the Capacitor and set which frequency it should use. By default, Capacitors use frequency number 0, but this can be changed either by:

• Right-clicking the Capacitor and entering the desired frequency number into its GUI
• Shift-right-clicking the Capacitor while holding a Frequency Card

Activate the Fortron Capacitor by supplying it with a Redstone signal. Once activated, the Capacitor will change from red to blue and begin transferring Fortron between other MFFS devices that use the same frequency and are within range (15 blocks by default).

Upgradability

A Fortron Capacitor may be augmented with various modules to enhance its capabilities:

• Scale Module: Enables the Capacitor to link with other MFFS machines over a larger distance Each module increases the range by 1 block from the default of 15 blocks
• Speed Module: Allows the Capacitor to transfer Fortron to and from machines more quickly. Each module increases the transfer rate by 50 FE
• Capacity Module: Increases the amount of Fortron the Capacitor is able to store